Home > Steel Hydraulic Fittings > Steel JIC/AN Fittings >

2706
2706
 
Alternative Views:
NPTF Male Pipe x 37° JIC Bulkhead Straight
2706 JIC fitting interchange to the following manufacturers:

* Aeroquip 2240


Use with 306 bulkhead lock nut
NPTF Male Pipe x 37° JIC Bulkhead Straight

Item# Item Name Our Price Qty Add
2706-02-04 2706-02-04 - 1/8" NPTF Male x 1/4" JIC (7/16"-20 thread) Bulkhead hydraulic fittings
$10.87
2706-04-04 2706-04-04 - 1/4" NPTF Male x 1/4" JIC (7/16"-20 thread) Bulkhead hydraulic fittings
$11.09
2706-04-06 2706-04-06 - 1/4" NPTF Male x 3/8" JIC (9/16"-18 thread) Bulkhead hydraulic fittings
$8.41
2706-06-06 2706-06-06 - 3/8" NPTF Male x 3/8" JIC (9/16"-18 thread) Bulkhead hydraulic fittings
$10.38
2706-06-08 2706-06-08 - 3/8" NPTF Male x 1/2" JIC (3/4"-16 thread) Bulkhead hydraulic fittings
$11.63
2706-08-06 2706-08-06 - 1/2" NPTF Male x 3/8" JIC 9/16"-18 thread) Bulkhead hydraulic fittings
$11.63
2706-08-08 2706-08-08 - 1/2" NPTF Male x 1/2" JIC (3/4"-16 thread) Bulkhead hydraulic fittings
$12.55
2706-08-10 2706-08-10 - 1/2" NPTF Male x 5/8" JIC (7/8"-14 thread) Bulkhead hydraulic fittings
$13.97
2706-12-12 2706-12-12 - 3/4" NPTF Male x 3/4" JIC (1 1/16"-12 thread) Bulkhead hydraulic fittings
$19.50
2706-16-16 2706-16-16 - 1" NPTF Male x 1" JIC (1 5/16"-12 thread) Bulkhead hydraulic fittings
$38.76
2706-20-20 2706-20-20 - 1-1/4" NPTF Male x 1-1/4" JIC (1-5/8"-12 thread) Bulkhead hydraulic fittings
$80.71
2706-24-24 2706-24-24 - 1-1/2" NPTF Male x 1-1/2" JIC (1-7/8"-12 thread) Bulkhead hydraulic fittings
$163.55
Check the items you wish to purchase, then click


Features:

Material Composition: Fittings from forged or cast pressure resistant carbon steel with a zinc-trivalent anti-corrosion coating
JIC SAE 37° and SAE ORB (O-Ring Boss) conform to SAE J514 technical specifications





Technical Specs:

JIC Thread Sizes Sizes (SAE J514, 37° Flare)

Commonly referred to as 37° JIC, this connection is widely used in hydraulic systems. When the straight threads are engaged, the 37° male seat seals on the 37° female flare seat. Most thread sizes are identical to the 45° SAE connection as noted (*) below. Care must be taken not to confuse these two connectors, which have different seat angles.

Dash Size Inch Size Thread Size Male Thread (O.D) Female Thread (I.D.)
2 1/8" 1/8-27* .31 .27
3 3/16" 3/8-24* .38 .34
4 1/4" 7/16-20* .44 .39
5 5/16" 1/2-20* .5 .45
6 3/8" 9/6-18* .56 .51
8 1/2" 3/4-16* .75 .67
10 5/8" 7/8-14* .88 .8
12 3/4" 3/4-14 1.06 .98
14 7/8" 1 3/16-12 1.18 1.09
16 1" 1 5/16-12 1.31 1.22
20 1 1/4" 1 5/8-12 1.63 1.54
24 1 1/2" 1 7/8-12 1.88 1.79
32 2" 2.5-12 2.5 2.41