Home > Steel Hydraulic Fittings > Steel JIC/AN Fittings >

2702
2702
 
Alternative Views:
37° JIC Bulkhead Union 45° Elbow
2702 JIC fitting interchange to the following manufacturers:

* Weatherhead C35375

* Aeroquip 2042

* SAE 070801

* Parker WNTX* WLN* S


Use with 306 bulkhead lock nut
37° JIC Bulkhead Union 45° Elbow

Item# Item Name Our Price Qty Add
2702-03-03 2702-03-03 - 45° Elbow, 3/16" JIC (3/8"-24 thread) x 3/16" JIC (3/8"-24 thread) Bulkhead hydraulic fittings
$38.49
2702-04-04 2702-04-04 - 45° Elbow, 1/4" JIC (7/16"-20 thread) x 1/4" JIC (7/16"-20 thread) Bulkhead hydraulic fittings
$8.44
2702-05-05 2702-05-05 - 45° Elbow, 5/16" JIC (1/2"-20) x 5/16" JIC (1/2"-20) Bulkhead hydraulic fittings
$11.42
2702-06-06 2702-06-06 - 45° Elbow, 3/8" JIC (9/16"-18 thread) x 3/8" JIC (9/16"-18 thread) Bulkhead hydraulic fittings
$6.83
2702-08-08 2702-08-08 - 45° Elbow, 1/2" JIC (3/4"-16 thread) x 1/2" JIC (3/4"-16 thread) Bulkhead hydraulic fittings
$10.40
2702-10-10 2702-10-10 - 45° Elbow, 5/8" JIC (7/8"-14 thread) x 5/8" JIC (7/8"-14 thread) Bulkhead hydraulic fittings
$15.12
2702-12-12 2702-12-12 - 45° Elbow, 3/4" JIC (1 1/16"-12 thread) x 3/4" JIC (1 1/16"-12 thread) Bulkhead hydraulic fittings
$20.03
2702-16-16 2702-16-16 - 45° Elbow, 1" JIC (1 5/16"-12 thread) x 1" JIC (1 5/16"-12 thread) Bulkhead hydraulic fittings
$74.03
2702-20-20 2702-20-20 - 45° Elbow, 1-1/4" JIC (1-5/8"-12 thread) x 1-1/4" JIC (1-5/8"-12 thread) Bulkhead hydraulic fittings
$132.28
Check the items you wish to purchase, then click


Features:

Material Composition: Fittings from forged or cast pressure resistant carbon steel with a zinc-trivalent anti-corrosion coating
JIC SAE 37° and SAE ORB (O-Ring Boss) conform to SAE J514 technical specifications





Technical Specs:

JIC Thread Sizes Sizes (SAE J514, 37° Flare)

Commonly referred to as 37° JIC, this connection is widely used in hydraulic systems. When the straight threads are engaged, the 37° male seat seals on the 37° female flare seat. Most thread sizes are identical to the 45° SAE connection as noted (*) below. Care must be taken not to confuse these two connectors, which have different seat angles.

Dash Size Inch Size Thread Size Male Thread (O.D) Female Thread (I.D.)
2 1/8" 1/8-27* .31 .27
3 3/16" 3/8-24* .38 .34
4 1/4" 7/16-20* .44 .39
5 5/16" 1/2-20* .5 .45
6 3/8" 9/6-18* .56 .51
8 1/2" 3/4-16* .75 .67
10 5/8" 7/8-14* .88 .8
12 3/4" 3/4-14 1.06 .98
14 7/8" 1 3/16-12 1.18 1.09
16 1" 1 5/16-12 1.31 1.22
20 1 1/4" 1 5/8-12 1.63 1.54
24 1 1/2" 1 7/8-12 1.88 1.79
32 2" 2.5-12 2.5 2.41