Home > Steel Hydraulic Fittings > NPT Pipe Thread >

5702

5702
 
Alternative Views:


NPTF Pipe Female x Pipe Swivel Male 90° Elbow


5702 NPTF Pipe hydraulic fittings correspond to the following:
* Aeroquip 2252
* Brennan 5702
* Tmk 5502S
NPTF Pipe Female x Pipe Swivel Male 90° Elbow

Item# Item Name Our Price Qty Add
5702-04-04 5702-04-04 - 90° Elbow, 1/4" NPTF Female x 1/4" NPTF Male Swivel hydraulic fittings
$29.75
5702-06-06 5702-06-06 - 90° Elbow, 3/8" NPTF Female x 3/8" NPTF Male Swivel hydraulic fittings
$27.32
5702-08-08 5702-08-08 - 90° Elbow, 1/2" NPTF Female x 1/2" NPTF Male Swivel hydraulic fittings
$36.07
5702-12-12 5702-12-12 - 90° Elbow, 3/4" NPTF Female x 3/4" NPTF Male Swivel hydraulic fittings
$81.01
Check the items you wish to purchase, then click


Features:

Material Composition: Fittings from forged or cast pressure resistant carbon steel with a zinc-trivalent anti-corrosion coating
JIC SAE 37° and SAE ORB (O-Ring Boss) conform to SAE J514 technical specifications





Technical Specs:

Pipe Thread Size NPTF and NPSM Sizes

American Dryseal Pipe Threads (NPTF and NPSM)is used connection incorporates two methods of sealing. The male NPTF (Dryseal) tapered thread will mate with the NPTF tapered female which is usually a port and seal when the special threads are crushed together. Male PTF (Short Dryseal) are identical to male NPTF threads except that the thread lengths have been shortened by one full thread from the small end of the taper. Additional sealing aids such as pipe dope and Teflon tape are often used with these threads. If the male has a 30 degree seat it will mate with the 30 degree cone seat in the NPSM straight thread swivel female usually found on adapters and is mechanically held together by the threads. NPTF and NPSM are not interchangeable with the British pipe threads.

Dash Size Inch Size Thread Size Male Thread (O.D) Female Thread (I.D.)
2 1/8" 1/8-27 .41 .37
4 1/4" 1/4-18 .54 .49
6 3/8" 3/8-18 .68 .62
8 1/2" 1/2-14 .84 .76
12 3/4" 3/4-14 1.06 .98
16 1" 1-11.5 1.31 1.24
20 1 1/4" 1 1/4-11.5 1.66 1.58
24 1 1/2" 1 1/2-11.5 1.90 1.82
32 2" 2-11.5 2.38 2.29