Home > Steel Hydraulic Fittings > NPT Pipe Thread >

5603

5603
 
Alternative Views:


NPTF Pipe Run Tee


5603 NPTF Pipe hydraulic fittings correspond to the following:
* Weatherhead C3805
* Aeroquip 2093

NPTF Pipe Run Tee

Item# Item Name Our Price Qty Add
5603-02-02-02 5603-02-02-02 - Run Tee, 1/8" NPTF Male x 1/8" NPTF Female x 1/8" NPTF Male hydraulic fittings
$6.11
5603-04-04-04 5603-04-04-04 - Run Tee, 1/4" NPTF Male x 1/4" NPTF Female x 1/4" NPTF Male hydraulic fittings
$15.27
5603-06-06-06 5603-06-06-06 - Run Tee, 3/8" NPTF Male x 3/8" NPTF Female x 3/8" NPTF Male hydraulic fittings
$7.96
5603-08-08-08 5603-08-08-08 - Run Tee, 1/2" NPTF Male x 1/2" NPTF Female x 1/2" NPTF Male hydraulic fittings
$11.71
5603-12-12-12 5603-12-12-12 - Run Tee, 3/4" NPTF Male x 3/4" NPTF Female x 3/4" NPTF Male hydraulic fittings
$17.90
5603-16-16-16 5603-16-16-16 - Run Tee, 1" NPTF Male x 1" NPTF Female x 1" NPTF Male hydraulic fittings
$95.71
5603-20-20-20 5603-20-20-20 - Run Tee, 1-1/4" NPTF Male x 1-1/4" NPTF Female x 1-1/4" NPTF Male hydraulic fittings
$186.59
5603-24-24-24 5603-24-24-24 - Run Tee, 1-1/2" NPTF Male x 1-1/2" NPTF Female x 1-1/2" NPTF Male hydraulic fittings
$181.27
Check the items you wish to purchase, then click


Features:

Material Composition: Fittings from forged or cast pressure resistant carbon steel with a zinc-trivalent anti-corrosion coating
NPT and NPSM are pipe thread. NPSM is straight while NPT is tapered. Female National Pipe Straight Mechanical (NPSM) fittings incorporate a 30° seat against the male creating a metal leak resistant connection





Technical Specs:

Pipe Thread Size NPTF and NPSM Sizes

American Dryseal Pipe Threads (NPTF and NPSM)is used connection incorporates two methods of sealing. The male NPTF (Dryseal) tapered thread will mate with the NPTF tapered female which is usually a port and seal when the special threads are crushed together. Male PTF (Short Dryseal) are identical to male NPTF threads except that the thread lengths have been shortened by one full thread from the small end of the taper. Additional sealing aids such as pipe dope and Teflon tape are often used with these threads. If the male has a 30 degree seat it will mate with the 30 degree cone seat in the NPSM straight thread swivel female usually found on adapters and is mechanically held together by the threads. NPTF and NPSM are not interchangeable with the British pipe threads.

Dash Size Inch Size Thread Size Male Thread (O.D) Female Thread (I.D.)
2 1/8" 1/8-27 .41 .37
4 1/4" 1/4-18 .54 .49
6 3/8" 3/8-18 .68 .62
8 1/2" 1/2-14 .84 .76
12 3/4" 3/4-14 1.06 .98
16 1" 1-11.5 1.31 1.24
20 1 1/4" 1 1/4-11.5 1.66 1.58
24 1 1/2" 1 1/2-11.5 1.90 1.82
32 2" 2-11.5 2.38 2.29