Home > Steel Hydraulic Fittings > Steel JIC/AN Fittings >

2705
2705
 
Alternative Views:
NPTF Female Pipe x 37° JIC Bulkhead Straight
2705 JIC fitting interchange to the following manufacturers:

* Weatherhead C35725

* Aeroquip 2239

* Parker WGTX-WLN-S


Use with 306 bulkhead lock nut
NPTF Female Pipe x 37° JIC Bulkhead Straight

Item# Item Name Our Price Qty Add
2705-02-04 2705-02-04 - 1/8" NPTF Female x 1/4" JIC (7/16"-20 thread) Bulkhead hydraulic fittings
$4.98
2705-04-02 2705-04-02 - 1/4" NPTF Female x 1/8" JIC (5/16"-24 thread) Bulkhead hydraulic fittings
$5.06
2705-04-04 2705-04-04 - 1/4" NPTF Female x 1/4" JIC (7/16"-20 thread) Bulkhead hydraulic fittings
$12.33
2705-04-06 2705-04-06 - 1/4" NPTF Female x 3/8" JIC (9/16"-18 thread) Bulkhead hydraulic fittings
$7.00
2705-06-06 2705-06-06 - 3/8" NPTF Female x 3/8" JIC (9/16"-18 thread) Bulkhead hydraulic fittings
$16.09
2705-06-08 2705-06-08 - 3/8" NPTF Female x 1/2" JIC (3/4"-16 thread) Bulkhead hydraulic fittings
$10.15
2705-08-08 2705-08-08 - 1/2" NPTF Female x 1/2" JIC (3/4"-16 thread) Bulkhead hydraulic fittings
$16.61
2705-08-10 2705-08-10 - 1/2" NPTF Female x 5/8" JIC (7/8"-14 thread) Bulkhead hydraulic fittings
$18.04
2705-12-12 2705-12-12 - 3/4" NPTF Female x 3/4" JIC (1 1/16"-12 thread) Bulkhead hydraulic fittings
$17.46
2705-16-16 2705-16-16 - 1" NPTF Female x 1" JIC (1 5/16"-12 thread) Bulkhead hydraulic fittings
$29.00
2705-20-20 2705-20-20 - 1-1/4" NPTF Female x 1-1/4" JIC (1-5/8"-12 thread) Bulkhead hydraulic fittings
$96.77
2705-24-24 2705-24-24 - 1-1/2" NPTF Female x 1-1/2" JIC (1-7/8"-12 thread) Bulkhead hydraulic fittings
$172.26
Check the items you wish to purchase, then click


Features:

Material Composition: Fittings from forged or cast pressure resistant carbon steel with a zinc-trivalent anti-corrosion coating
JIC SAE 37° and SAE ORB (O-Ring Boss) conform to SAE J514 technical specifications





Technical Specs:

JIC Thread Sizes Sizes (SAE J514, 37° Flare)

Commonly referred to as 37° JIC, this connection is widely used in hydraulic systems. When the straight threads are engaged, the 37° male seat seals on the 37° female flare seat. Most thread sizes are identical to the 45° SAE connection as noted (*) below. Care must be taken not to confuse these two connectors, which have different seat angles.

Dash Size Inch Size Thread Size Male Thread (O.D) Female Thread (I.D.)
2 1/8" 1/8-27* .31 .27
3 3/16" 3/8-24* .38 .34
4 1/4" 7/16-20* .44 .39
5 5/16" 1/2-20* .5 .45
6 3/8" 9/6-18* .56 .51
8 1/2" 3/4-16* .75 .67
10 5/8" 7/8-14* .88 .8
12 3/4" 3/4-14 1.06 .98
14 7/8" 1 3/16-12 1.18 1.09
16 1" 1 5/16-12 1.31 1.22
20 1 1/4" 1 5/8-12 1.63 1.54
24 1 1/2" 1 7/8-12 1.88 1.79
32 2" 2.5-12 2.5 2.41